REQUIRES:
My fairing arrives black Primer. It is required to sand down and repaint IN ANY CASE.
We specialized in hand made fiberglass part.
“This Fairing comes in Primer. We only use high quality Primer on our products. We put extra care into our finishes, our fiberglass part is handmade We go above and beyond by putting more time, money, effort and care into making sure your product comes out nice and easy for your painter. Our Fairings are tough and made with heavy duty material. It is made of high quality hand laid fiberglass. Prep work will be needed before painting. Please consult a professional for best results on painting and installation. This is an amazing product at an even better price. Feel free to contact me with any questions.”
OUR FAIRING ONLY FITS SINGLE DIN RADIO WITH OUR CD COVER
INCLUDED:
1) HONDA VTX FAIRING 4x5” INCHES SPEAKER HOLES.
2) 5 INCHES WINDSHIELD
3) 6 O-RINGES
4) NUTS AND BOLTS TO PUT THE FAIRING TOGETHER. (STAINLESS STEEL NUTS AND BOLTS)
NOT INCLUDED: SPEAKERS, CD COVER, CD PLAYER
NOTHING ELSE INCLUDED UNLESS STATED ABOVE.
PLEASE READ:
IF YOU ARE INTERESTED IN BUYING SOME EXTRA PARTS LIKE: SPEAKERS, RADIO, CD ADAPTER..., PLEASE CLICK HERE , AND FAIRING TRIM CLICK
FAIRING ARRIVES IN PRIMER BLACK. PREP WORKS WILL BE NEEDED BEFORE FAIRING CAN BE PAINTED
Clamps to fork tubes between the triple trees; will not work with Spec 2 or 3-type chrome fork tube covers
NOTE: PLEASE SEE A PROFESSIONAL FOR INSTALLATION
The 1800 fairing can fit on the Honda VTX 1300
Honda VTX 1300 R & S models:
The R & S model fork tubes between the triple trees are covered with sheet metal shrouds that have to be removed for the fairing installation. This entails you to remove the top tree to slide the shrouds off the tubes, which should be done according to your shop manual. After you have removed the shrouds, the fairing can be installed on the bare fork tubes with the use of PVC pipe spacers. The spacers are needed because the inverted forks on the 1800 model (which the fairing is a custom fit to) are a larger diameter than the 1300 model. Without the spacers the mounting clamps would crush the fiberglass fairing.
Honda VTX 1300 C model:
The C model fork tubes needs only the spacers to physically mate up the fairing, but there is a interference problem with the turn signals. They have to be removed from the fork tubes to allow the fairing to be mounted. If relocated below the lower tree they may interfere with the front suspension travel, so we don't recommend that. Custom turn signals are suggested
*** BIKE MUST BE EQUIPED WITH HARDWARE TO ACCEPT NORMAL WINDSHIELD IN ORDER TO ACCEPT THIS FAIRING. WE ONLY PROVIDE THE HARDWARES TO ATTACH THIS FAIRING TO YOUR ORGINAL HARDWARE.