ENTER CODE: FREESHIPPING48 TO GET FREE SHIPPING FOR US 48 STATES
Cart 0
HONDA VTX BATWING FAIRING WINDSHIELD C R S 1800 1300 BAGGER 4x5" SPKS

TALON BILLETS

HONDA VTX BATWING FAIRING WINDSHIELD C R S 1800 1300 BAGGER 4x5" SPKS

$180.85 $200.00

INCLUDED:

1) HONDA VTX FAIRING 4x5” INCHES SPEAKER HOLES WITH LED LIGHT

2) 5 INCHES WINDSHIELD

3) 6 O-RINGES

4) NUTS AND BOLTS TO PUT THE FAIRING TOGETHER. (STAINLESS STEEL NUTS AND BOLTS)

NOT INCLUDED: SPEAKERS, CD COVER,  CD PLAYER

NOTHING ELSE INCLUDED UNLESS STATED ABOVE.

PLEASE READ:

SPEARKERS, CD PLAYER  ARE NOT INCLUDED IN THIS AUCTION

PLEASE READ:

*** WE DO OFFER A CD PLAYER FOR AN ADDITION $100

*** WE DO OFFER SPEAKERS FOR AN ADDITION $100

*** WE DO OFFER CD COVER FOR AN ADDITION $30

*** WE DO OFFER FAIRING TRIM+ NICE BOLTS FOR AN ADDITION $59

***WE DO OFFER A 12" CLEAR WINDSHIELD FAIRING FOR AN ADDITION $60

***ANTENNA --- INTERNAL ANTENNA PLACED USED INSIDE THE FAIRING WITH RADIO.  ADDITIONAL $15

 *** PLEASE LOOK AT OUR OTHER AUCTIONS FOR THOSE ***

IF INTERESTED IN EITHER ADD ON, PLEASE SEND ME A MESSAGE.  I WILL BILL YOU FOR IT.  IF SHIPPED WITH FAIRING, NO ADDITIONAL SHIPPING CHARGES.  IF SHIPPED SEPARATELY......SHIPPING WILL BE $9

FAIRING ARRIVES IN PRIMER BLACK. PREP WORKS WILL BE NEEDED BEFORE FAIRING CAN BE PAINTED

Clamps to fork tubes between the triple trees; will not work with Spec 2 or 3-type chrome fork tube covers

NOTE: PLEASE SEE A PROFESSIONAL FOR INSTALLATION

The 1800 fairing can fit on the Honda VTX 1300

Honda VTX 1300 R & S models:

The R & S model fork tubes between the triple trees are covered with sheet metal shrouds that have to be removed for the fairing installation.  This entails you to remove the top tree to slide the shrouds off the tubes, which should be done according to your shop manual.  After you have removed the shrouds, the fairing can be installed on the bare fork tubes with the use of PVC pipe spacers.  The spacers are needed because the inverted forks on the 1800 model (which the fairing is a custom fit to) are a larger diameter than the 1300 model.  Without the spacers the mounting clamps would crush the fiberglass fairing.

Honda VTX 1300 C model:

The C model fork tubes needs only the spacers to physically mate up the fairing, but there is a interference problem with the turn signals.  They have to be removed from the fork tubes to allow the fairing to be mounted.  If relocated below the lower tree they may interfere with the front suspension travel, so we don't recommend that.  Custom turn signals are suggested

***  BIKE MUST BE EQUIPED WITH HARDWARE TO ACCEPT NORMAL WINDSHIELD IN ORDER TO ACCEPT THIS FAIRING. WE ONLY PROVIDE THE HARDWARES TO ATTACH THIS FAIRING TO YOUR ORGINAL HARDWARE.


Share this Product


More from this collection