INCLUDED:
1) HONDA VTX FAIRING 4x5” INCHES SPEAKER HOLES.
2) 5 INCHES WINDSHIELD
3) 6 O-RINGES
4) NUTS AND BOLTS TO PUT THE FAIRING TOGETHER. (STAINLESS STEEL NUTS AND BOLTS)
FAIRING ARRIVES IN GELCOAT BLACK. PREP WORKS WILL BE NEEDED BEFORE FAIRING CAN BE PAINTED
Clamps to fork tubes between the triple trees; will not work with Spec 2 or 3-type chrome fork tube covers
NOTE: PLEASE SEE A PROFESSIONAL FOR INSTALLATION
The 1800 fairing can fit on the Honda VTX 1300
Honda VTX 1300 R & S models:
The R & S model fork tubes between the triple trees are covered with sheet metal shrouds that have to be removed for the fairing installation. This entails you to remove the top tree to slide the shrouds off the tubes, which should be done according to your shop manual. After you have removed the shrouds, the fairing can be installed on the bare fork tubes with the use of PVC pipe spacers. The spacers are needed because the inverted forks on the 1800 model (which the fairing is a custom fit to) are a larger diameter than the 1300 model. Without the spacers the mounting clamps would crush the fiberglass fairing.
Honda VTX 1300 C model:
The C model fork tubes needs only the spacers to physically mate up the fairing, but there is a interference problem with the turn signals. They have to be removed from the fork tubes to allow the fairing to be mounted. If relocated below the lower tree they may interfere with the front suspension travel, so we don't recommend that. Custom turn signals are suggested
*** BIKE MUST BE EQUIPED WITH HARDWARE TO ACCEPT NORMAL WINDSHIELD IN ORDER TO ACCEPT THIS FAIRING. WE ONLY PROVIDE THE HARDWARES TO ATTACH THIS FAIRING TO YOUR ORGINAL HARDWARE.
SOME ITEM CAN'T BE COMBINE FOR SHIPPING.
ITEM WILL BE SEND OUT FROM DALLAS, TEXAS USA.
WE WILL SHIP TO CONFIRMED ADDRESS ON PAYPAL ONLY.
Please email us directly if you have any questions, concerns, problems or anything with us. We will do our best to assist you and make sure you’re satisfied. Please contact by email. Best way to contact us is through email. Please give us up to 24 hours to reply to email. We do not work in the weekend and holidays. Please read the entire description to make sure it’s what you want to buy and make sure it fits your bike. Please research before you buy, we will try out best to answer your questions but sometime we are not 100% sure. Most our parts are compatible with OEM part only. Please make your part are OEM and extra accessories will work on your bike.